default logo

At Total Blast Services, we are focused on providing quality services with the highest levels of customer satisfaction – we will do everything we can to meet your expectations.

With a variety of finishes to choose from, we’re sure you’ll be happy working with us.

Look around our website and if you have any comments or questions, please feel free to contact us.

We hope to see you again!


Powder Coating is resistant to chipping, flaking, solvents, corrosives, and general wear and tear. This durability makes powder coating a superior protective coating for all metal products.

Each piece brought to us is prepared through chemical stripping, degreasing, or sandblasting to ensure an absolutely clean surface ready for coating. The coating is evenly applied in a powder form and then baked. Resulting in a hard, smooth, paint-like finish that will bend with the metal if dented or struck. The versatile properties of powder coating make it ideal for a variety of needs, both decorative & practical.


Bicycle Frames

Process Overview

1.First the frame is chemically dipped in a Non Acidic solution (may not be required on all frames)

2.The Frame is then Bead Blasted or Sand blasted depending on the frame material.

3.Once stripped the frame is inspected for damage & cracks.

4.The frame is prepared by hand, all threads, headrace & bottom bracket bearing locations masked or plugged.

5.Primer coat is applied and half baked

6.Top coats are applied and baked

7.Additional lacquers or special finishes can be applied at this stage if required

8.We can also apply supplied decals but they must be compatible with 2K clear lacquers.

9.Once coated the frame is de-masked, inspected. The bottom bracket threads are cleaned with a Threading and facing tool.